Stand-Alone Select; Preferred Language - Harmonic ProView 2900 Installation Manual

Chapter 8: Service Configuration Menu
8.3.

Stand-Alone Select

This feature will be supported in the future software releases.
8.4.

Preferred Language

The Preferred Language Edit menu screen lists the audio channels available for the received
services.
To access the Preferred Language edit menu in the front panel control interface go to
Configuration Service Preferred Language.
1 Audio 1 1 Audio 1 1 Audio 1 1 Audio 1
2 Audio 2 2 Audio 2
2 Audio 2 2 Audio 2
3 3 3 3 V V V VB B B B i 1
4 4 4 4 Subtitling 1 Subtitling 1 Subtitling 1 Subtitling 1
NOTE
The number of audio channels provided in the Preferred Languages Menu is dynamic and
is determined by the ProView 2900 model. Audio 3 and Audio 4 channels are available in dual
decoders, ProView 2980, and ProView 2981 models only.
Figure 8-4 displays the corresponding Preferred Language menu in the Web Management
screen (Service Preferred Language).
The operator can assign a preferred language to each of the Audio channels, as well as to
the available VBIs and Subtitling.
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Preferred Language Preferred Language
Preferred Language Preferred Language
i 1 i 1 i 1
Figure 8-4: Preferred Language Screen
8-6 ProView 2900 Series/SW Version 1.94
Preferred Language
1 1 1 1 - - - - 2 2 2 2 - - - - 3 3 3 3 - - - - 4 4 4 4
ALL LANGUAGES ALL LANGUAGES ALL LANGUAGES ALL LANGUAGES
English Old- - - - ang English Old ang
English Old English Old ang ang
1073 1073 1073 1073
1073 1073 1073 1073