Harmonic ProView 2900 Installation Manual page 149

Chapter 8: Service Configuration Menu
Figure 8-6 displays the corresponding Port to Service Menu (Web Management screen).
Figure 8-6:
The available options are:
PCR1, PCR2 (if applicable),
•
Video1, Video2 (if applicable),
•
Audio1, Audio2, Audio3 (if applicable), Audio4 (if applicable),
•
VBI1, VBI2 (if applicable),
•
Subtitling1, Subtitling2 (if applicable),
•
LS Data RS232, HS Data RS-422
•
In order to map a port to service thru the front panel, perform the following:
Navigate to Configuration Service
Select one of the listed ports using the keypad. For example: PCR1.
After selection, the following menu screen lists all options for the selected port.
1 1 1 1
2 2 2 2
3 3 3 3
The available options are:
STAND ALONE – This mode indicates that you can assign the elementary stream PID.
•
In this mode, the elementary stream is independent of the services selected for
Decoder#1 and decoder#2.
TV1 (and TV2, when available) – This mode indicates that the elementary stream is
•
related to the service assigned to Decoder#1 (or Decoder#2 for TV2).
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Port to Service Menu Screen
PCR1 PCR1 PCR1 PCR1
STAND ALONE STAND ALONE
STAND ALONE STAND ALONE
TV1 TV1
TV1 TV1
TV2 TV2
TV2 TV2
Mapping Port to Service
8-10 ProView 2900 Series/SW Version 1.94
Mapping Port to Service