Harmonic ProView 2900 Installation Manual page 213

Chapter 14: Unit Configuration Menu
The following describe managing the Trap Destination:
To add a new Trap Destination:
1. Access the Traps tab. From the web-interface, go to: Unit Traps.
2. In the Trap Table, type valid values for the IP Address, Port, Description (optional)
and Community String (optional) parameters. For example see Figure 14-12.
3. Click ADD.
To drop a Trap Destination:
1. Access the Traps tab. From the web-interface, go to: Unit Traps.
2. Click the Delete button located right to the trap entry. For example see Figure
14-13.
To modify a Trap Destination:
1. Access the Traps tab. From the web-interface, go to: Unit Traps.
2. Change the Trap entry parameters.
2. Click the Apply button located right to the trap entry. For example see Figure
14-14.
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Figure 14-12: Add New Trap Destination
Figure 14-13: Delete Trap Destination
Figure 14-14: Modify Trap Destination
14-17
Traps Menu (Web Manager Only)
ProView 2900 Series/SW Version 1.94