Filtering Parameters - Harmonic ProView 2900 Installation Manual

Chapter 7: Stream Configuration Menu

7.5.3. Filtering Parameters

The Stream Filtering General menu provides several filtering parameters for ASI and IP
output ports.
To access the General menu through the front panel go to:
Configuration Stream Filtering General
1 1 1 1 Mode Mode
Mode Mode
2 2 2 2 Strategy Strategy Strategy Strategy
3 3 3 3 Biterate Mod Biterate Mode e e e
Biterate Mod Biterate Mod
4 4 4 4 Bitrate Bitrate Bitrate Bitrate
To access the General menu through the Web Manager go to: Stream Filtering
Figure 7-4 displays the corresponding general filtering Web management screen.
Mode
7.5.3.1.
This parameter allows the user to set the selected services or PIDs to be transmitted or
filtered at the output ports. Two values are available:
Configuration Stream Filtering General Mode
The following figure shows the Mode front panel screen:
TRANSMIT TRANSMIT TRANSMIT TRANSMIT
FILTER FILTER FILTER FILTER
The available options are:
TRANSMIT – this mode forwards only selected services or PIDs to the output (Excluding
•
unselected or unreferenced services or PIDs).
FILTER - this mode excludes the selected services or PIDs from the output.
•
© Harmonic Inc. Manual p/n 101543/Ver 1.0
General General General General
Figure 7-4: General Filtering Parameters Menu Screen
Mode Mode
Mode Mode
7-12 ProView 2900 Series/SW Version 1.94
Stream Filtering Configuration
1 1 1 1 - - - - 2 2 2 2 - - - - 2 2 2 2 - - - - 4 4 4 4 - - - - 1 1 1 1
TRANSMIT TRANSMIT
TRANSMIT TRANSMIT
PID PID PID PID
CBR CBR
CBR CBR
72.000000[Mbs} 72.000000[Mbs} 72.000000[Mbs} 72.000000[Mbs}
1 1 1 1 - - - - 2 2 2 2 - - - - 2 2 2 2 - - - - 4 4 4 4