Mpegoip Input 1 - Harmonic ProView 2900 Installation Manual

Chapter 6: Receiver Configuration Modules
The following is the IP Receiver configuration menu as it is displayed on the ProView 2900
front panel screen:

1 MPEGoIP Input 1

1 MPEGoIP Input 1 1 MPEGoIP Input 1 1 MPEGoIP Input 1
2 MPEGoIP Input 2 2 MPEGoIP Input 2
2 MPEGoIP Input 2 2 MPEGoIP Input 2
3 General 3 General 3 General 3 General
The available options are:
MPEGoIP Input 1 - allows the user to configure the MPEGoIP receiver connected to the
•
rear panel MPEGoIP IN 1 interface (for details, refer to paragraph 6.3.1).
MPEGoIP Input 2- allows the user to configure the MPEGoIP receiver connected to the
•
rear panel MPEGoIP IN 2 interface (for details, refer to paragraph 6.3.1).
General allows the user to confugure parameters such as redundancy, De-jittering
•
delay, and FEC (for details, refer to paragraph 6.3.2)..
6.3.1. MPEGoIP Input 1
The MPEGo-IP Input 1 sub-menu allows the user to configure the MPEGoIP receiver
connected to the rear panel MPEGoIP interface.
NOTE
MPEGoIP Input 2 menu is identical to the MPEGoIP Input 1 menu
1 Physical Link 1 Physical Link
1 Physical Link 1 Physical Link
2 Logical Source 2 Logical Source
2 Logical Source 2 Logical Source
3 FEC 3 FEC 3 FEC 3 FEC
Figure 6-6 displays the corresponding DVB-IP Receiver MPEGoIP 1 Parameters Menu (Web
Management screen).
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Receiver Receiver
Receiver Receiver
MPEGoIP Input 1 MPEGoIP Input 1 MPEGoIP Input 1 MPEGoIP Input 1
6-29
IP Receiver Configuration
1 1 1 1 - - - - 2 2 2 2 - - - - 1 1 1 1
1 1 1 1 - - - - 2 2 2 2 - - - - 1 1 1 1 - - - - 1 1 1 1
ProView 2900 Series/SW Version 1.94