Rate Range; Input Stream Identifier (Isi); Asi Mode - Harmonic ProView 2900 Installation Manual

Chapter 7: Stream Configuration Menu

7.2.3. Rate Range

The Rate Range parameter defines the range of the ASI input rates.
1 1 1 1
2 2 2 2
3 3 3 3
The available options are:
UPTO 72Mb/s – Selected when using a CAM for descrambling
•
UPTO 108Mb/s – Selected when not using CAM and inputting a transport Stream within
•
a rate of 72 to 108Mb/s.
ABOVE 108Mb/s – Not in use.
•
NOTE
The ASI Input-Rate Range parameter in the front panel interface corresponds with Stream
Rate Range in the Web management interface (see

7.2.4. Input Stream Identifier (ISI)

The ProView 2900 support Multiple Input transport Streams (MIS). This support is being done
using DVB-S2 Input Stream Identifier (ISI).
This identifier is present in the Baseband Header of a DVB-S2 Baseband Frame.
The ISI is a single byte identifying the encapsulated stream in case of Multiple Input Streams
and by entering it the user can choose which TS to receive.
00[Hex 00[
00[ 00[
< < < < 00 00- - - - FF
00 00
The Identifer ISI value ranges from 00[Hex] to FF[Hex].

7.2.5. ASI Mode

The ASI Mode parameter allows selecting between BURST format and NORMAL format.
1 1 1 1
2 2 2 2
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Rate Range Rate Range
Rate Range Rate Range
UPTO 72Mb/s UPTO 72Mb/s
UPTO 72Mb/s UPTO 72Mb/s
UPTO 108Mb/s UPTO 108Mb/s
UPTO 108Mb/s UPTO 108Mb/s
ABOVE 108Mb/s ABOVE 108Mb/s
ABOVE 108Mb/s ABOVE 108Mb/s
Identifier (ISI) Identifier (ISI) Identifier (ISI) Identifier (ISI)
Hex] ] ] ]
Hex Hex
FF> > > >
FF FF
Type Type Type Type
BURST BURST BURST BURST
NORMAL NORMAL NORMAL NORMAL
).
Figure 7-2
7-7 ProView 2900 Series/SW Version 1.94
Stream Input