High Speed Data - Harmonic ProView 2900 Installation Manual

Chapter 12: GenLock Configuration Menu

11.4. High Speed Data

High Speed Data is only supported in ProView 2960 and ProView 2990 models.
The High Speed Data Menu is used for setting the transfer rate & direction (MSB↔LSB) and
the type of data to be sent, through the High Speed Data port.
To access the Low Speed Data menu in the ProView 2900 front panel control interface go to
Configuration Data High Speed Data Port:
The following screen displays the High Speed Data menu:
1 Tx Clock 1 Tx Clock
1 Tx Clock 1 Tx Clock
2 Tx Direction 2 Tx Direction 2 Tx Direction 2 Tx Direction
3 Layer Filtering 3 Layer Filtering
3 Layer Filtering 3 Layer Filtering
To access the Low Speed Data menu in the ProView 2900 web management window go to
Data High Speed Data Port:
Figure 11-4 displays the corresponding IP Data Port menu (Web Management screen).
© Harmonic Inc. Manual p/n 101543/Ver 1.0
High Speed Data High Speed Data
High Speed Data High Speed Data
Figure 11-4: High Speed Data Configuration Menu
11-9
High Speed Data
1 1 1 1 - - - - 2 2 2 2 - - - - 6 6 6 6 - - - - 2 2 2 2
08.307692 [Mb/s] 08.307692 [Mb/s]
08.307692 [Mb/s] 08.307692 [Mb/s]
MS MS MSB B B B - - - - > LSB MS > LSB > LSB > LSB
T.S PAYLOAD T.S PAYLOAD
T.S PAYLOAD T.S PAYLOAD
ProView 2900 Series/SW Version 1.94