Audio Decoder Mode Setup - Harmonic ProView 2900 Installation Manual

Chapter 10: Audio Configuration Menu
Figure 10-2 displays the corresponding Audio1 Menu (Web Management screen).
Figure 10-2:
NOTES
Although AC3 Downmix Mode, AC3 Operational Mode, and PassThru Sample Rate
parameters can always be accessed from the Audio (1..4) Parameters window, they are
affective only when their corresponding mode is selected in Decoder Mode.
In the Web Management window, AC3 Downmix Mode and AC3 Operational Mode are
effective only when Dolby AC3 is selected in Decoder Mode
In the Web Management, window PassThru Sample Rate is effective only when PassThru is
selected in Decoder Mode.
Digital Format will be supported by the ProView 2900 Web Control interface in the future SW
releases.
The following paragraphs detail the Audio Configuration options.

10.2. Audio Decoder Mode Setup

The Audio Decoder mode option allows the user setting the following parameters for an
Audio channel:
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
5 5 5 5
This menu controls the decoder audio mode; The available options are:
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Audio 1 Menu Screen
Decoder Mode Decoder Mode Decoder Mode Decoder Mode
MUSICAM MUSICAM
MUSICAM MUSICAM
DOLBY- - - - AC3 DOLBY AC3
DOLBY DOLBY AC3 AC3
AC3 PASSTHRU AC 3 PASSTHRU
AC AC 3 PASSTHRU 3 PASSTHRU
LINEAR- - - - PCM LINEAR PCM
LINEAR LINEAR PCM PCM
AUTOMATIC AUTOMATIC AUTOMATIC AUTOMATIC
10-3 ProView 2900 Series/SW Version 1.94
Audio Decoder Mode Setup