Chapter 12: GenLock Configuration Menu
11.3.6. Destination IP Address
The Destination IP Address parameter allows setting the required destination IP address.
242.001.001.026
242.001.001.026
242.001.001.026
242.001.001.026
The value in each field must be a number between 0 and 255.
11.3.7. UDP Source Port
The UDP Source Port parameter allows setting the source UDP port number.
02000
02000
02000
02000
<00000- - - - 65535>
<00000
<00000
<00000
The value in each field must be a whole number between 0 and 65535.
11.3.8. UDP Destination Port
The UDP destination Port parameter allows setting the UDP Destination port number.
02000 [Hex]
02000 [Hex]
02000 [Hex]
02000 [Hex]
<00000- - - - 65535>
<00000
<00000
<00000
The value is a whole number between 0 and 65535.
11.3.9. Number of Packets
The Number of Packets parameter allows setting the number of MPEG packets to be
contained in an IP frame (using the following Edit Value Screen).
07
07
07
07
<01- - - - 07>
<01
<01
<01
Available values are between 1 and 7.
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Dest IP Address
Dest IP Address
Dest IP Address
Dest IP Address
UDP Source Port
UDP Source Port
UDP Source Port
UDP Source Port
65535>
65535>
65535>
UDP Destination Port
UDP Destination Port
UDP Destination Port
UDP Destination Port
65535>
65535>
65535>
Num of Packets
Num of Packets
Num of Packets
Num of Packets
07>
07>
07>
IP-Out-Port Configuration Menu
11-8
ProView 2900 Series/SW Version 1.94