Rename Preset - Harmonic ProView 2900 Installation Manual

Chapter 5: Operation and Management

5.2.3. Rename Preset

The Rename submenu allows editing a stored preset name.
T
O RENAME A PRESET THROUGH THE FRONT PANEL
1. Access the Overwrite Existing screen. From the front panel go to
Root Preset Rename.
The following screen appears, lists all stored presets and allows selecting a
preset to rename.
Name Name Name Name
1 1 1 1 Default Default Default Default
2 2 2 2 Setup_1 Setup_1 Setup_1 Setup_1
3 3 3 3 Setup_2 Setup_2 Setup_2 Setup_2
4 4 4 4 Setup_3 Setup_3
Setup_3 Setup_3
2. Select one of the listed presets by using the [Up], [Down] and [ENTER] keys.
When selecting a preset to rename – the Rename edit screen appears:
S S S S etup_1 etup_1
etup_1 etup_1
3. Name the preset by using the
keys. To move between the characters, use the [LEFT] and [RIGHT] keys. To
save, press [ENTER].
T
O RENAME A PRESET THROUGH THE WEB
1. From the management bar, click on the
Preset tab.
2. Click on Rename tab.
3. Open the Existing Configuration drop-
down menu. From the list select a
preset to rename.
4. Type a new name for the preset in the New-Name textbox.
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Rename Rename Rename Rename
keypad. To change a character, use the [Up] and [Down]
-
INTERFACE
5-8
ProView 2900 Preset Menu
:
:
ProView 2900 Series/SW Version 1.94