Chapter 6: Receiver Configuration Modules
6.4.
DVB-ATM Receiver Configuration
This section details the ProView 2900 Front Panel and Web Manager menus that enable
configuring the DVB-ATM receiver in a ProView 2900 DVB-ATM front end device.
The following is the DVB-ATM Receiver Configuration menu as displayed on the
ProView 2900 front panel screen:
1 1 1 1 Mode
Mode
Mode
Mode
2 2 2 2 VPI Address
VPI Address
VPI Address
VPI Address
2 2 2 2 VCI Address
VCI Address
VCI Address
VCI Address
4 4 4 4 FEC
FEC
FEC
FEC
The available options are:
Mode – this parameter allows the user to set the operational mode of the ATM receiver.
•
VPI Address –this parameter allows the user to set the path address for the ATM
•
receiver.
VCI Address – this parameter allows the user to set the channel address for the ATM
•
receiver.
FEC – this parameter allows the user to enable FEC for the ATM receiver.
•
Figure 6-8 illustrates the structure of the configuration tree menu for the IP receiver.
Figure 6-8:
© Harmonic Inc. Manual p/n 101543/Ver 1.0
General
General
General
General
DVB-ATM Receiver Configuration Menu Tree Structure
6-36
DVB-ATM Receiver Configuration
1 1 1 1 - - - - 2 2 2 2 - - - - 1 1 1 1
0020
0020
0020
0020
ENABLE
ENABLE
ENABLE
ENABLE
ProView 2900 Series/SW Version 1.94
DS3
DS3
DS3
DS3
01
01
01
01