Source; Type - Harmonic ProView 2900 Installation Manual

Chapter 7: Stream Configuration Menu

7.2.1. Source

The Source parameter defines the input stream source.
When the receiver is active in the ProView 2900, the following menu is displayed:
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
The available options are:
FRONT-END (if applicable) – Selects the Receiver Front-End Interface as the source for
•
the input transport stream
ASI – Select the ASI digital input as the source for the input transport stream
•
SERIAL RS-422 – Selects the RS-422 serial input as the source for the input transport
•
stream
None - No input source is selected for the ProView 2900.
•
NOTES
The Decoder Stream Source screen is dynamic and it changes according to the currently-
active ProView 2900 interface.
Only qualified personnel should handle serial RS-422 option.
When Front-End (IP) is selected, the 27 MHz Synchronization option must be set to Fixed-
Value.

7.2.2. Type

The Type parameter allows selecting between ATSC format and DVB format.
1 1 1 1
2 2 2 2
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Source Source
Source Source
FRONT- - - - END (QPSK) FRONT END (QPSK)
FRONT FRONT END (QPSK) END (QPSK)
ASI ASI
ASI ASI
SERIAL RS- - - - 422 SERIAL RS 422
SERIAL RS SERIAL RS 422 422
None None None None
Type Type Type Type
ATSC ATSC
ATSC ATSC
DVB DVB
DVB DVB
7-6 ProView 2900 Series/SW Version 1.94
Stream Input