Mode; Vpi Address; Vci Address; Fec - Harmonic ProView 2900 Installation Manual

Chapter 6: Receiver Configuration Modules

6.4.1. Mode

The Mode parameter allows the user to set the operational mode of the ATM
receiver. The following is the front panel Mode screen:
1 1 1 1
2 2 2 2
2 2 2 2
4 4 4 4
5 5 5 5
6 6 6 6

6.4.2. VPI Address

The VPI Address parameter allows the user to set the path address for the ATM receiver. The
following is the front panel VPI Address screen:
01[Hex] 01[Hex] 01[Hex] 01[Hex]
<00- - - - FF> <00
<00 <00
The available values range from 00 to FF.

6.4.3. VCI Address

The VCI Address parameter allows the user to set the channel address for the ATM receiver.
The following is the front panel VCI Address screen:
0020[Hex] 0020[Hex] 0020[Hex] 0020[Hex]
<0000 <0000- - - - FFFF> <0000 <0000
The available values range from 00 to FF.

6.4.4. FEC

The FEC parameter allows the user to enable or disable FEC for the ATM receiver. The
following is the front panel FEC screen:
1 1 1 1
2 2 2 2
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Mode Mode Mode Mode
E3 E3 E3 E3
DS3 DS3 DS3 DS3
STM STM- - - - 1 MULTI MODE STM STM 1 MULTI MODE 1 MULTI MODE 1 MULTI MODE
STM STM- - - - 1 SINGLE MODE STM STM 1 SINGLE MODE 1 SINGLE MODE 1 SINGLE MODE
OC OC- - - - 3 MULTI MODE OC OC 3 MULTI MODE 3 MULTI MODE 3 MULTI MODE
OC OC- - - - 3 SINGLE MODE OC OC 3 SINGLE MODE 3 SINGLE MODE 3 SINGLE MODE
VPI Address VPI Address VPI Address VPI Address
FF>
FF> FF>
VPI Address VPI Address VPI Address VPI Address
FFFF> FFFF> FFFF>
VPI Address VPI Address
VPI Address VPI Address
Enable Enable
Enable Enable
Disable Disable
Disable Disable
DVB-ATM Receiver Configuration
6-37 ProView 2900 Series/SW Version 1.94