Blanking Mode; Sdi Embedded Audio - Harmonic ProView 2900 Installation Manual

Chapter 9: Video Configuration Menu
In the Web management interface, set the STC PCR Delay by typing the required delay (in
Milliseconds) into the parameter's free text window.

9.2.6. Blanking Mode

The Blanking Mode parameter sets the display mode of a service when reception stops. The
following figure illustrates the Blanking Mode screen.
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
5 5 5 5
The available options are:
Black – video output signal is a black screen.
•
Last Field – video output signal is the last field displayed.
•
Last Frame – video output signal is the last frame displayed.
•
75% BAR – video output signal is a colour-bar display.
•
Null – video outputs shut down with no output signal.
•

9.2.7. SDI Embedded Audio

The SDI Embedded Audio menu allows using SDI with embedded audio output.
The following figure illustrates the SDI Embedded Audio screen.
1 1 1 1
2 2 2 2
The available options are:
Disable – SDI output without embedded audio.
•
Enable - SDI output with embedded audio
•
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Blanking Mode Blanking Mode Blanking Mode Blanking Mode
Blac Black k k k Blac Blac
Last Field Last Field
Last Field Last Field
Last Frame Last Frame
Last Frame Last Frame
75% BAR 75% BAR
75% BAR 75% BAR
Null Null
Null Null
SDI Embedded Audio SDI Embedded Audio SDI Embedded Audio SDI Embedded Audio
DISABLE DISABLE DISABLE DISABLE
ENABLE ENABLE ENABLE ENABLE
Video 1 (and Video 2) Configuration Options
9-6 ProView 2900 Series/SW Version 1.94