Chapter 10: Audio Configuration Menu
10.5. PassThru Sample Rate
The PassThru Sample Rate parameter allows the user setting the sampling frequency for the
AC3 Pass-through.
1 1 1 1
2 2 2 2
3 3 3 3
The available options are: 48.0 [KHz], 44.1 [KHz], 32.0 [KHz]
10.6. Volume
The Volume parameter allows the user setting the audio volume of the audio channel.
A graphical volume display illustrates the volume level.
Available values are between (–)64 and 0dB.
10.7. Analog Output
The Analog Output parameter sets Mute or Play mode in an audio channel output.
1 1 1 1
2 2 2 2
The available options are:
MUTE – this analog audio output is disabled
•
UNMUTE (PLAY) – this analog audio output is enabled
•
10.8. Analog Mixer
The Analog Mixer parameter, displayed on the following screen, allows setting the stereo and
mono options of the stereo channels.
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
5 5 5 5
The available options are:
© Harmonic Inc. Manual p/n 101543/Ver 1.0
PassThru Sample Rate
PassThru Sample Rate
PassThru Sample Rate
PassThru Sample Rate
48.0 [KHz]
48.0 [KHz]
48.0 [KHz]
48.0 [KHz]
44.1 [KHz]
44.1 [KHz]
44.1 [KHz]
44.1 [KHz]
32.0 [KHz]
32.0 [KHz]
32.0 [KHz]
32.0 [KHz]
Volume
Volume
Volume
Volume
< < < <
- - - - 64
64
64
64 - - - - 00
00
00
00
Analog Output
Analog Output
Analog Output
Analog Output
MUTE
MUTE
MUTE
MUTE
UNMUTE (PLAY)
UNMUTE (PLAY)
UNMUTE (PLAY)
UNMUTE (PLAY)
Analog Mixer
Analog Mixer
Analog Mixer
Analog Mixer
STEREO(L & R)
STEREO(L & R)
STEREO(L & R)
STEREO(L & R)
MONO MIXING
MONO MIXING
MONO MIXING
MONO MIXING
SWAP (R & L)
SWAP (R & L)
SWAP (R & L)
SWAP (R & L)
BOTH RIGHT
BOTH RIGHT
BOTH RIGHT
BOTH RIGHT
BOTH LEFT
BOTH
LEFT
BOTH
BOTH
LEFT
LEFT
>
>
>
>
10-5
ProView 2900 Series/SW Version 1.94
Analog Mixer
00
00
00
00
[dB]
[dB]
[dB]
[dB]