H Control - Harmonic ProView 2900 Installation Manual

Chapter 12: GenLock Configuration Menu
To access the Genlock configuration screen through the web-interface from the management
bar, click on the Genlock tab.
Figure 12-2 shows the web-interface Genlock screen:
The Genlock menu consists of following sub-menus:

12.2. H Control

This submenu allows setting the Horizontal GenLock synchronization delay. To access the H
Control submenu go to:
Root Configuration Genlock H Control
The following figure shows the front panel H Control edit screen:
+0000[ [ [ [ nSec +0000 +0000 +0000
< < < < 0 0 0 0 - - - - +1728
The Horizontal Control delay ranges from -7[nSec] to +1728[nSec].
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Figure 12-2:
H Control H Control H Control H Control
nSec] ] ] ] nSec nSec
+1728> > > >
+1728 +1728
Web Interface Genlock Screen
12-2 ProView 2900 Series/SW Version 1.94
H Control