Decoder Outputs - Harmonic ProView 2900 Installation Manual

Chapter 2: Introduction

2.4.3. Decoder Outputs

Feature
Video
Front panel
Monitoring
VBI Re-insertion
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Specifications
Video Formats:
PAL-B/G/I/M/N/D, NTSC, SECAM L/B/G/K1
•
Russian SECAM D/K (composite video only supported only by
•
special order in ProView 2960, ProView 2961 and ProView 2990)
Decoding:
4:2:0 MP@ML (1.5 – 15 Mbps)
•
4:2:2 PP@ML (1.5 – 50 Mbps) (supported only in ProView 298x)
•
Maximum TS decoding bit rate: 108Mbps
Video resolution interpolation: Pan-scan, letter box or Pass through
Aspect ratios: 4:3/16:9
Aspect ratio 14:9 by signaling over VBI video index
Graphical processing (OSD): DVB subtitling, EBU (Teletext)
subtitling
OSD only through monitoring output
Genlock input and loop-through output and phase compensation
(supported only by ProView 2962, ProView 2963, ProView 2981 and
ProView 2992)
Genlock Sync lock resolution: +/- 37nSec
Video monitor output connector (Supported only by 298x)
Audio monitor output connector (Supported only by 298x)
All VBIs adhere the relevant standards including the line numbers
In composite video and embedded SDI
WST Teletext and inverted Teletext
WSS, VPS, VITC, CC, AMOL I, AMOL II (Nielsen), TV-Guide, V-
CHIP
Enhanced VITS with built-in generator
2-17
Characteristics and Specifications
ProView 2900 Series/SW Version 1.94