Chapter 13: CA Configuration Menu
To access the Conditional Access Configuration menu in the front panel control interface go
to Configuration
The following screen displays the Conditional Access menu:
1 Common Interface
1 Common Interface
1 Common Interface
1 Common Interface
2 BISS
2 BISS
2 BISS
2 BISS
3 Embedded
3 Embedded
3 Embedded
3 Embedded
To access the Conditional Access configuration screen through the web-interface from the
management bar, click on the CA tab.
Figure 13-2 shows the web-interface CA screen:
The Conditional Access Menu parameters are as follows:
Common Interface (CI)
•
Enable setting up the configuration of the CAMS in the ProView 2900 using the DVB-CI
standard. For details, see Section 13.2.
BISS Mode
•
Enable setting up the BISS encryption mode. For details, see Section 0.
Embedded Mode
•
Enable setting up the embedded encryption mode. For details, see Section 13.3.2.
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Conditional Access.
Conditional Access
Conditional Access
Conditional Access
Conditional Access
Figure 13-2:
Web Interface Conditional Access Screen
13-2
CA Configuration Menu Tree
1 1 1 1 - - - - 2 2 2 2 - - - - 7 7 7 7
ProView 2900 Series/SW Version 1.94