Receiver Status - Harmonic ProView 2900 Installation Manual

Chapter 5: Operation and Management
The following example displays the Web management Status monitoring screen.

5.4.1. Receiver Status

The Receiver Status screen displays the main Receiver parameter current values. The
following paragraphs detail the Status screen of each available receiver module type (DVB-S,
DVB-S2, DSNG and IP Front End interfaces).
To enter the Receiver Status menu in the front panel, go to Status
(independently of receiver module type).
DVB-S Receiver Status
5.4.1.1.
To access the DVB-S Receiver status screen in the front panel control interface go to
Status Receiver.
NOTE
The LNB L.O. Frequency parameter is activated when the Ku and C-Band is selected.
The following screen displays the DVB-S Receiver Status menu:
1 Signal Quality 1 Signal Quality 1 Signal Quality 1 Signal Quality
2 2 2 2 C/N C/N
C/N C/N
3 Eb/N0 3 Eb/N0 3 Eb/N0 3 Eb/N0
4 4 4 4 Link Margin Link Margin Link Margin Link Margin
5 BER 5 BER 5 BER 5 BER
6 Frequency Tune 6 Frequency
6 Frequency 6 Frequency
7 7 7 7 Frequency Offset Frequency Offset
Frequency Offset Frequency Offset
8 8 8 8 FEC FEC Rate FEC FEC
9 9 9 9 Spectral Inversion Spectral Inversion
Spectral Inversion Spectral Inversion
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Receiver Receiver
Receiver Receiver
Tune
Tune Tune
Rate Rate Rate
5-13
ProView 2900 Status Menu
Receiver
1 1 1 1 - - - - 2 2 2 2 - - - - 1 1 1 1
100[%] 100[%] 100[%] 100[%]
1 1 1 1 9. 9.69 69[dB] [dB]
9. 9. 69 69 [dB] [dB]
09.94[dB] 09.94[dB] 09.94[dB] 09.94[dB]
+04.9 +04.9[ [ [ [ dB] +04.9 +04.9 dB] dB]
0.0e 0.0e 0.0e- - - - 7 7 7 7 0.0e
1.068000[ [ [ [ G G G G Hz] 1.068000 Hz]
1.068000 1.068000 Hz]
+02214[KHz] +02214[KHz]
+02214[KHz] +02214[KHz]
5/6 5/6
NORMAL NORMAL
NORMAL NORMAL
ProView 2900 Series/SW Version 1.94
dB]
Hz]
5/6 5/6