Chapter 10: Audio Configuration Menu
STEREO (L & R) – Standard stereo output on the respective left and right connectors
•
MONO MIXING – Mixes left and right stereo channel signals for mono output on both left
•
and right connectors
SWAP (R & L) – Swaps channels:
•
Left channel on right connectors
•
Right channel on left connectors
•
BOTH RIGHT – Outputs right channels on both left and right connectors
•
BOTH LEFT – Outputs left channels on both left and right connectors
•
10.9. Digital Format
The Digital Format parameter sets the digital audio channel output mode.
1 1 1 1
2 2 2 2
The available options are:
CONSUMER – Selects AES/EBU, SPDIF Consumer Mode. – This mode passes the
•
audio mode bits as is.
PROFESSIONAL – Selects AES/EBU Professional Mode. This mode set the audio mode
•
to stereo regardless of actual audio.
10.10. Audio Delay
The Audio Delay parameter sets the delay time for the received audio:
The following figure illustrates the Audio Delay setup screen.
0 0 0 0 0 0 0 0 0 [mSec]
0 [mSec]
0 [mSec]
0 [mSec]
< < < < - - - - 128
128 - - - - +12
128
128
Available delay time ranges from -128 to +128 mSec.
10.11. Test Tone
The ProView 2900 can create a 1 kHz audio test signal, and output it through any of its audio
outputs for testing that audio output performance. The operator must select the audio output
to be tested and enable the creation of the test tone for that output.
1 1 1 1
2 2 2 2
The available options are:
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Digital Format
Digital Format
Digital Format
Digital Format
CONSUMER
CONSUMER
CONSUMER
CONSUMER
PROFESSIONAL
PROFESSIONAL
PROFESSIONAL
PROFESSIONAL
DELAY
DELAY
DELAY
DELAY
+128 8 8 8 > > > >
+12
+12
Test Tone
Test Tone
Test Tone
Test Tone
DISABLE
DISABLE
DISABLE
DISABLE
1000 Hz
1000 Hz
1000 Hz
1000 Hz
10-6
ProView 2900 Series/SW Version 1.94
Test Tone