This Appendix summarizes the content of the ProView 2900 configuration file.
The configuration file is mostly used for configuration backup and for redundancy application.
The configuration file is uploaded and downloaded through the FTP.
The ProView 2900 Configuration file holds parameters regarding the following:
Stream Configurations – see section D.1.
•
Service Configurations – see section D.2.
•
Video Configurations – see section D.3.
•
Audio Configurations – see section D.4.
•
Data Configurations – see section D.5.
•
DVB S Receiver Configurations – see section D.6.
•
IP Receiver Configurations – see section D.7.
•
D.1
Stream Configurations
The ProView 2900 Configuration file holds the following Stream parameters:
Stream Type
•
Stream Rate Range
•
ASI Mode
•
ASI Output Type
•
IP Output Type
•
27MHz Synchronization
•
D.2
Service Configurations
The ProView 2900 Configuration file holds the following Service parameters:
TV1 Select
•
TV2 Select
•
Stand alone select
•
Preferred languages
•
(Audio 1-4, VBI 1-2, Subtitling 1-2).
PID Select
•
(PCR 1-2, Video 1-2, Audio 1-4, VBI 1-2, Subtitling 1-2, LS Data RS232, HS Data
RS422)
Mapping port to service
•
(PCR 1-2, Video 1-2, Audio 1-4, VBI 1-2, Subtitling 1-2, LS Data RS232, HS Data RS422,
General Configuraion , Service strategy , Service CAS open)
© Harmonic Inc. Manual p/n 101543/Ver 1.0
ProView 2900 Configuration File
D-1
ProView 2900 Series/SW Version 1.94
Appendix D