Appendix A: Software Download
2. In the HyperTerminal, select Transfer send file.
3. Specify to which used protocol to send the software file. It can be "Xmodem" or
"1K Xmodem" protocol.
NOTE
"1K Xmodem" is faster than "XModem".
4. Specify the path of the software file on your PC, for example:
5. Click Send. The loading starts. This may take a few minutes.
The status is displayed in the following window below or on the ProView 2900
front panel main menu.
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Figure A-14:
Ready to Receive New Software
Figure A-15:
A-10
Send File Dialog Box
ProView 2900 Series/SW Version 1.94