Power Window Motor Replacement; Power Window Switch Replacement - GMC G Service Manual

H Install or Connect
1. Switch.
2. Switch connector.
3. Switch connector retaining nut.
4. Door trim panel. Refer to DOORS (SEC. 10A1).
5. Battery ground cable to the battery.
POWER WINDOW MOTOR
REPLACEMENT
H
Remove or Disconnect
1. Battery ground cable from the battery.
2. Door trim panel. Refer to DOORS (SEC. 10A1).
3. Motor. Refer to DOORS (SEC. 10A1).
Install or Connect
1. Motor. Refer to DOORS (SEC. 10A1).
2. Door trim panel. Refer to DOORS (SEC. 10A1).
3. Battery ground cable to the battery.
H
1. Battery ground cable from the battery.
2. Door trim panel. Refer to DOORS (SEC. 10A1).
3. Switch connector retaining nut.
4. Switch connector.
5. Switch.
H
1. Switch.
2. Switch connector.
3. Switch connector retaining nut.
4. Door trim panel. Refer to DOORS (SEC. 10A1).
5. Battery ground cable to the battery.
Figure 42 — R/V Wiper Motor Mounting
CAB ELECTRICAL 8A-39
POWER WINDOW SWITCH
REPLACEMENT
Remove or Disconnect
• Press in both retaining tabs at the same time.
Install or Connect