10A1-18 POORS
DOOR TRIM PANEL
REPLACEMENT
E
Remove or Disconnect (Figure 28)
Tools Required:
J 9886-01 Door Handle Clip Remover.
J 24595-B Door Trim Pad Clip Remover.
1. Window regulator handle using J 9886-01 (figures 6
and 7).
2. Lock knob.
3. Arm rest to arm rest bracket screws (91).
4. Arm rest from the door.
5. Strap assembly c'overs (if equipped).
6. Strap assembly screws (if equipped).
7. Strap assembly (if equipped).
8. Door trim panel to door screws (93).
9. Door trim panel to door retainers using J 24595-B
(figure 9).
Figure 27 — Door Adjustments
10. Door trim panel from the door.
E
Install or Connect (Figure 28)
Check that all the trim retainers are securely fas
tened, and are not damaged. Replace any damaged
fasteners.
1. Door trim panel onto the door side window seal clips.
2. Door trim retainers into the door panel.
3. Door trim panel to door screws (93).
4. Strap assembly onto the door (if equipped).
5. Strap assembly screws (if equipped).
6. Strap assembly covers (if equipped).
7. Arm rest to the door.
8. Arm rest to arm rest bracket screws (91).
9. Lock knob.
10. Window regulator handle.
• Pry the top of the panel away from the door side
window seal clips.
L00104