Rear Lamp Bulb Replacement; Rear Lamp Housing And Seal Replacement - GMC G Service Manual

30. Instrument Panel Harness Connector
31. Connector - 4 Speed Manual Transmission
32. Manual Transmission (M20)

REAR LAMP BULB REPLACEMENT

R/V MODELS
|++| Remove or Disconnect (Figure
1. Battery ground cable from the battery.
2. Lens retaining screws (86).
3. Lens (80).
4. Bulb (10, 11 or 16).
Install or Connect (Figure
1. Bulb (10, 11 or 16).
2. Lens (80).
3. Lens retaining screws (86).
4. Battery ground cable to the battery.
G-VAN
Remove or Disconnect (Figures
1. Battery ground cable from the battery.
2.
Lens housing retaining screws (101).
3. Lamp housing (100).
Figure 33—R/V Model Backup Lamp Switch and Wiring
34)
34)
and
30 35)
CHASSIS ELECTRICAL 8B-29
33. Back Up Switch
34. Manual Transmission (MY6)
Bulb socket (52 and 53) by squeezing the retention
lock and rotating the socket counterclockwise.
Bulb from the bulb socket (52 and 53).
Install or Connect (Figures 30 and 35)
1. Bulb into the bulb socket.
2. Bulb socket (52 and 53) into the housing.
3. Lamp housing (100).
4. Lens housing retaining screws (101).
5. Battery ground cable to the battery.
REAR LAMP HOUSING AND SEAL
REPLACEMENT
R/V MODELS
|++| Remove or Disconnect (Figure
1. Battery ground cable from the battery.
2. Lens retaining screws (86).
3. Lens (80).
4. Housing retaining screws (81).
5. Housing (82).
L01 0 00
34)