Suburban Rear Seat Replacement; Suburban Rear Seat Belt Replacement - GMC G Service Manual

10A2-20 SEATS
Figure 27 — Rear Seat Latch Components
SUBURBAN REAR SEAT
REPLACEMENT
REMOVAL
1. Unlatch the seat, and pull towards the rear of the
vehicle.
2. Remove the seat from the vehicle.
INSTALLATION
1. Place the seat in the vehicle.
2. Place the hooked retainers onto the anchor pins.
3. Latch the seat.
4. Push back and forth on the seat to be sure it is
H
1. Rear seat latch cover (141) (figure 26).
2. Seat belts (151 and 152) to latch bolts (150).
3. Seat belts (151 and 152) from the seat.
4. Side buckle (148) to floor panel bolts (149).
5. Buckle (148) from the vehicle.
|+*| Install or Connect (Figure 28)
1. Buckle (148) to the vehicle.
2. Buckle (148) to floor panel bolts (149).
3. Seat belts (151 and 152) to the seat.
4. Seat belt to latch bolts (150).
5. Rear seat latch cover (141) (figure 26).
Figure 28 — Suburban Rear Seat Belts
latched.
SUBURBAN REAR SEAT BELT
REPLACEMENT
Remove or Disconnect (Figure 28)
NOTICE: For steps 2 and 4 see " Notice" on page
10A2-1 of this section.
H O Tighten
• Bolts to 50 N»m (37 ft. lbs.).
H O Tighten
• Bolts to 50 N»m (37 ft. lbs.).
148. Buckle
149. Bolt
150. Bolt
151. Buckle
Assembly
152. Latch Plate
151
B-09076