License Plate Lamp Replacement - GMC G Service Manual

8B-30 CHASSIS ELECTRICAL
6. Lamps (10, 11 and 16).
7. Seal (84).
E3
Install or Connect (Figure 34)
1. Seal (84).
• Install the seal with the tabs (83) pointed for­
ward.
• Apply adhesive at the four corners of the seal in
order to hold the seal in place.
2. Lamps (10, 11 and 16).
3. Housing (82).
4. Housing screws (81).
80
R/V MODELS
Figure 34—R/V Model Rear Lamp Assembly
Figure 35—Van Rear Lamp
5. Lens (80).
6. Lens screws (86).
7. Battery ground cable to the battery.
LICENSE PLATE LAMP
REPLACEMENT
Remove or Disconnect (Figure 36)
1. Battery ground cable from the battery.
2. Housing retaining screws (92) or bolts (97).
3. Lens.
4. Bulb.
Side Marker Lamp (Cream)
I 10.
10
Running, Turn, Stop Lamp
11 .
Back Up Lamp
16.
Lens
80.
Housing Screw
81.
82. Housing
83. Tab
84. Seal
85. Clip Nut
Lens Screw
86 .
F-00874