Door Outside Handle Replacement; Door Lock Cylinder Replacement; Check Strap Replacement - GMC G Service Manual

Figure 119 — Right Door Control Assembly
Attachment
DOOR OUTSIDE HANDLE
REPLACEMENT
H Remove or Disconnect (Figure 120)
1. Door trim panel. Refer to "Door Trim Panel
Replacement."
2. Door to outside handle screws (522).
3. Handle from the door.
4. Gaskets from the door.
522
522. Screw
523. Small Gasket
524. Outside Handle
525. Key
526. Lock Cylinder
527. Large Gasket
528. Retainer
529. Gasket
Figure 120 — Outside Handle and Lock Cylinder Attachments
M Install or Connect (Figure 120)
1. Large gasket onto the handle.
2. Door to outside handle screw (522) to the push button
side of the handle.
• Do not tighten.
3. Small gasket between the door and the handle.
4. Door to outside handle screw (522) to the other side
of the handle.
• Tighten both screws.
5. Door trim panel. Refer to "Door Trim Panel
Replacement."
DOOR LOCK CYLINDER
REPLACEMENT
M Remove or Disconnect (Figure 120)
1. Door trim panel. Refer to "Door Trim Panel
Replacement."
2. Lock cylinder retaining clip from the cylinder.
• Slide the clip off the cylinder with a screwdriver.
3. Lock cylinder and gasket from the door.
H Install or Connect (Figure 120)
1. Lock cylinder with gasket to the door.
• The cylinder rod must engage the lock assem­
bly lever.
2. Lock cylinder retaining clip onto the cylinder.
3. Door trim panel. Refer to "Door Trim Panel
Replacement."

CHECK STRAP REPLACEMENT

I4"*! Remove or Disconnect (Figure 108)
1. Pin (469).
2. Strap to door bolts (474).
DOORS 10A1-79
523
524
F-00561