Door Trim Panel Replacement - GMC G Service Manual

10A1-6 POORS
Figure 5 — Door Hinge Bolt Wrench
DOOR TRIM PANEL
E REPLACEMENT
Remove or Disconnect (Figures 6 through 9)
Tools Required:
J 9886-01 Door Handle Clip Remover.
J 24595-B Door Trim Pad Clip Remover.
1. Window regulator handle using J 9886-01 (figures 6
and 7).
2. Lock knob.
3. Arm rest to arm rest bracket screws (77).
4. Arm rest from the door.
5. Strap assembly covers (if equipped).
6. Strap assembly screws (24) (if equipped).
7. Strap assembly (if equipped).
8. Door trim panel to door screws (22).
9. Door trim panel to door retainers using J 24595-B
(figure 9).
Door trim panel from the door.
10 .
• Pry the top of the panel away from the door side
window seal clips.
B
Install or Connect (Figure 8)
• Check that all the trim retainers are securely fas­
tened, and are not damaged. Replace any damaged
fasteners.
1. Door trim panel onto the door side window seal clips.
2. Door trim retainers into the door panel.
3. Door trim panel to door screws (22).
4. Strap assembly onto the door (if equipped).
5. Strap assembly screws (if equipped).
6. Strap assembly covers (if equipped).
7. Arm rest to the door.
8. Arm rest to arm rest bracket screws (77).
9. Lock knob.
10. Window regulator handle.
L00136
A. Push The Tool
In Direction Of
Arrow
Figure 7 — Handle Clip Remover, Rear View
E l l *
J 9886-01
17. Spring Clip
L00107
18. Inside Handle