Swing Out Window - GMC G Service Manual

10A1-76 POORS
498
4. Rivets (if equipped) to the weatherstrip with a rivet
gun.
• Use 3/16-inch blind rivets.

SWING OUT WINDOW

H Remove or Disconnect (Figure
CAUTION: Always wear heavy gloves when han­
dling glass to minimize the risk of injury.
1. Window latch to door screws (509).
2. Window latch from the window.
• Twist the latch 1/4 of a turn to release the latch
components from the window.
• Lift the window for access to the hinge screws.
498. Glass
499. Weatherstrip
500. Rivet
500
Figure 114 — Window Components
3. Hinge to door screws (502).
4. Hinge from the door.
5. Hinge seal from the door.
B
Install or Connect (Figure 115)
1| Hinge and hinge seal to the door.
115)
2. Hinge to door screws (502).
3. Window latch to the window.
4. Window latch to door screws (509).
• Place the cover and spacer through the
window.
• Place the washer and spring onto the cover.
• Twist the latch onto the cover with 1/4 of a turn.
498
499
F-00555