Bumper Wedge Replacement - GMC G Service Manual

10A1-50 DOORS
• The front intermediate striker on the rear door. Adjust
it so that the front door lock properly engages the rear
door, and so the front door is flush with the rear door.

BUMPER WEDGE REPLACEMENT

M Remove or Disconnect (Figure 75)
1. Bumper to upper and lower door frame screws (308).
2. Bumper and spacer.
H install or Connect (Figure 75)
1. Spacer (as required).
2. Bumper.
3. Bumper to upper and lower door frame screws (308).
\ ^ \ Adjust
• The bumper to door clearance so that there is 1 mm
(0.04-irich) between the bumper and the door when
the door is in the secondary position. (The door is
latched but not fully closed.)
312
313
307. Bolt
308. Screws
309. Bumper
310. Spacer
311. Upper Latch
312. Lower Latch
313. Screw
314. Drain Hole Plug
Figure 75 — Bumper Wedge Components
310
.309
308
314
F-00506