Fuel Gage Replacement - GMC G Service Manual

8C-10 INSTRUMENT PANEL
70 72 73 74 75
70. Bolt (#8-32 x 7/16")
71. Speedometer Mounting Bushing
72. Nut
73. Flat Washer
74. Laminated Circuit
75. Screw (#8-18 x 7/16")
76. Fuel Gage
77. Engine Oil Pressure Gage
78. Screw (#8-16 x 7/16")
79. Retainer
2. Speedometer cable assembly from the speedometer.
• Compress the spring clip (30).
• Pull the cable assembly from the speedometer.
3. Cable core.
• Pull the core out of the speedometer end of the
casing. If the cable core is broken, remove the
lower piece of the core from the transmission
end of the casing.
[»»| Install or Connect (Figures 4, 7, 8, and 9)
1. Lubricant in the casing and on the core.
2. Core into the speedometer end of the casing. Turn
the core to engage the drive gear in the transmission.
3. Speedometer cable assembly into the speedometer
head until the spring clip (30) engages.
4. Battery ground cable to the battery.
76 77 78
80. Speedometer
81. Gage Mask
82. Lens Retainer
83. Lens
84. Bezel
85. Voltmeter
86. Lamp
87. Engine Coolant Temperature Gage
88. Fuel Gage
89. Instrument Cluster With Gages
90. Instrument Cluster Without Gages
Figure 6 — Van Instrument Panel

FUEL GAGE REPLACEMENT

R/V MODELS
E Remove or Disconnect (Figures 4 and 5)
1. Battery ground cable from the battery.
2. Headlamp switch knob assembly. Refer to CHASSIS
ELECTRICAL (SEC. 8B)
3. Radio control knobs.
4. Clock adjuster stem.
5. Instrument cluster bezel (43).
6. Steering column cover.
7. Instrument cluster lens (42).
8. Transmission shift indicator (41).
9. Case front cover (44).
10. Fuel gage attaching screws.
11. Fuel gage (35).