Right Door Lower Latch Replacement; Right Door Upper Latch Replacement; Right Door Control Assembly Replacement - GMC G Service Manual

10A1-78 DOORS
RIGHT DOOR LOWER LATCH
REPLACEMENT
M Remove or Disconnect (Figure 117)
1. Door trim panel. Refer to "Door Trim Panel
Replacement."
2. Lower latch to control assembly rod from the control
assembly.
• Using a flat bladed screwdriver, push on the top
of the clip where it is connected to the rod. Pivot
the clip away from the rod.
3. Lower latch to door screws (513).
4. Lower latch with the rod from the door.
h 4! Install or Connect (Figure 117)
1. Lower latch with the rod to the door.
2. Lower latch to door screws (513).
3. Lower latch to control assembly rod into the control
assembly.
• Pivot the clip onto the rod.
4. Door trim panel. Refer to "Door Trim Panel
Replacement."
Figure Right Door Lower Latch
117 —
RIGHT DOOR UPPER LATCH
REPLACEMENT
M Remove or Disconnect (Figure
1. Door trim panel. Refer to "Door Trim Panel
Replacement."
2. Upper latch to control assembly rod from the control
assembly.
• Using a flat bladed screwdriver, push on the top
of the clip where it is connected to the rod. Pivot
the clip away from the rod.
3. Upper latch to door bolts (517).
4. Upper latch with the rod from the door.
M Install or Connect (Figure 118)
1. Upper latch with the rod to the door.
2. Upper latch to door bolts (517).
3. Upper latch to control assembly rod into the control
assembly.
4. Door trim panel. Refer to "Door Trim Panel
Replacement."
518. Upper Latch
519. Upper Lock Rod
|+"H Remove or Disconnect (Figure 119)
1. Door trim panel. Refer to "Door Trim Panel
Replacement."
2. Upper and lower door latch rods from the control
assembly.
3. Electric door actuator (if equipped).
4. Door to control assembly bolts (520).
5. Control assembly through the access hole.
E 3
Install or Connect (Figure 119)
118)
1. Control assembly through the access hole.
3. Electrical door actuator (if equipped).
4. Upper and lower door latch rods to the control
assembly.
5. Door trim panel. Refer to "Door Trim Panel
• Pivot the clip onto the rod.
Figure 118 — Right Door Upper Latch
RIGHT DOOR CONTROL
ASSEMBLY REPLACEMENT
• Using a flat bladed screwdriver, push on the top
of the clip where it is connected to the rod. Pivot
the clip away from the rod.
Door to control assembly bolts (520).
• Pivot the clips onto the rods.
Replacement."