Cruise Control Module Replacement - GMC G Service Manual

• Note that audible "clicks" can be heard as the
threaded portion of the valve is pushed through the
retainer toward the brake pedal.
• Pull the brake pedal fully rearward against the pedal
stop, until the audible "click" sounds can no longer be
heard.
• Release the brake pedal and repeat step 2 to assure
that no audible "click" sounds remain.
3. Connector (98).
G TRUCK
H Remove or Disconnect (Figure 11)
1. Harness connector (121).
2. Module assembly (116) by prying back the retaining
clip on the bracket and sliding the module out.
M Install or Connect (Figure 11)
1. Module assembly (116).
2. Harness connector (121).
7. Brake Pedal Bracket
8. Instrument Panel Harness Connector
9. Vacuum Release Valve Assembly (Automatic Transmission)
10. Vacuum Lines
11. Vacuum Release Valve Assembly (Manual Transmission)
12. Retainer
13. Stop Lamp Switch
14. Brake Pedal
Figure 9 — Vacuum Release Valve
98. Connector
99. Clutch Release Switch
100. Clutch
101. Brake Pedal Bracket
102. Retainer
Figure 10 — Clutch Release Switch
ACCESSORIES 9-9
CRUISE CONTROL MODULE
REPLACEMENT
100
R/V-TRUCK
F-02435
L00249