Rear Marker Lamp Bulb Replacement - GMC G Service Manual

8B-32 CHASSIS ELECTRICAL
|-»<-| Install or Connect (Figure 36)
1. Bulb.
2. Lens.
3. Housing retaining screws (92) or bolts (97).
4. Battery ground cable to the battery.
G-VAN
|<-+| Remove or Disconnect (Figure 37)
1. Battery ground cable from the battery.
2. Housing retaining bolts (105) and washers (106).
3. Lens.
4. Bulb.
103
Figure 37—G-Van License Lamp
102. Connector
103. Rear Lamp Harness
104. Lamp Assembly
105. Bolt
106. Washer
L00162
+«- Install or Connect (Figure 37)
1. Bulb.
2. Lens.
3. Housing retaining washers (106) and bolts (105).
4. Battery ground cable to the battery.
REAR MARKER LAMP BULB
REPLACEMENT
R/V MODELS
Remove or Disconnect (Figure 31)
Battery ground cable from the battery.
Housing retaining screws.
Housing.
Bulb socket.
Bulb.
0
Install or Connect (Figure 31)
1. Bulb.
2. Bulb socket into the housing.
3. Housing.
4. Housing retaining screws.
5. Battery ground cable to the battery.
G-VAN
|+-»| Remove or Disconnect (Figure 38)
1. Battery ground cable from the battery.
2. Housing retaining screws (113).
3. Housing (112).
4. Bulb socket (56).
5. Bulb.
Install or Connect (Figure 38)
1. Bulb.
2. Bulb socket (56) into the housing (112).
3. Housing (112).
4. Housing retaining screws (113).
5. Battery ground cable to the battery.