Door Inside Handle Replacement; Door Weatherstrip Replacement - GMC G Service Manual

10A1-14 POORS_______________________________________________
54. Bolt
55. Outside Handle Rod
56. Small Gasket
57. Handle Assembly
58. Key
59. Lock Cylinder
Figure 20 — Outside Handle and Lock Cylinder
Components
DOOR INSIDE HANDLE
REPLACEMENT
□
Remove or Disconnect (Figure 21)
1. Door trim panel. Refer to "Door Trim Panel
Replacement."
2. Door handle seal.
3. Handle to door screws (65).
60. Gasket
61. Large Gasket
62. Retainer
63. Clip
F-00457
Figure 21 — Door Inside Handle
4. Control rod from the inside handle.
• Slide the clip so that the large diameter slot is in
line with the lock rod. Then, pull the rod from the
handle.
B
Inside handle from the door.
Install or Connect (Figure 21)
Control rod to the inside handle.
• Place the rod into the clip and the lever. Slide
the clip so that the small diameter slot is in line
with the lock rod.
Handle to door screws (65).
2
.
3. Door handle seal.
4. Door trim panel. Refer to "Door Trim Panel
Replacement."
DOOR WEATHERSTRIP
REPLACEMENT
B
Remove or Disconnect (Figure 22)
Open the door.
Sill plate from the vehicle.
1.
Weatherstrip from the pinchweld flange.
2
.
• Pull the weatherstrip away from the flange.
51. Inside Door Handle Rod
63. Clip
64. Control Assembly
65. Bolt
66. Seal
LOO133