Intermediate Front Door Lock Replacement - GMC G Service Manual

10A1-54 DOORS
SWING OUT WINDOW
H Remove or Disconnect (Figures 79 and 80)
CAUTION: Always wear heavy gloves when han­
dling glass to minimize the risk of injury.
1. Window latch to door screws (327).
2. Window latch from the window.
• Twist the latch 1/4 of a turn to release the latch
components from the window.
• Lift the window for access to the hinge screws.
3. Hinge to door screws (320).
4. Hinge from the door.
5. Hinge seal from the door.
E
Install or Connect (Figures 79 and 80)
1. Hinge and hinge seal to the door.
2. Hinge to door screws (320).
3. Window latch to the window.
• Place the cover and spacer through the
window.
• Place the washer and spring onto the cover.
• Twist the latch onto the cover with 1/4 of a turn.
4. Window latch to door screws (327).
E
Figure 80 — Swing Out Window Attachment
322
323
318
318. Glass
322. Cover 326. Spring
323. Spacer 327. Screw
325. Washer 328. Latch
Figure 79 — Swing Out Latch Components
INTERMEDIATE FRONT DOOR
LOCK REPLACEMENT
Remove or Disconnect (Figure 81)
1. Door trim panel. Refer to "Door Trim Panel
Replacement."
2. Door lock control. Refer to "Door Lock Control
Replacement."
3. Power door lock motor (if equipped). Refer to "Power
Door Lock Motor Replacement."
4. Door to remote control screws (330).
5. Door to lock screws (331).
6. Lock and remote control with rods from the door.
327