In An Emergency; Moving The Printer - Canon iPF8400S User Manual

iPF8400S

In an Emergency

• If the printer emits smoke or strange odors, continuing to use the printer may cause a fire or electrical shock. Switch the
printer off immediately and remove the power plug from the power outlet. Contact the nearest service center.
Warning
Cleaning the Printer
• For cleaning, use a cloth dampened in water. Never use flammable solvents such as alcohol, benzene, or thinner. If
these substances come into contact with electrical components inside the printer, there is a risk of fire or electrical shock.
Warning
Always disconnect the power cable from the outlet before cleaning the printer. If the printer is switched on accidentally,
•
moving parts inside the printer may cause personal injuries.
Caution
Pacemakers
• This printer generates a low-level magnetic field. Anyone wearing a pacemaker who experiences discomfort while work-
ing around the printer should leave the area. Consult a physician before continuing to work around the printer.
Warning

Moving the Printer

• Moving the printer requires at least six people, holding it on both sides. Be careful to avoid back strain and other injuries.
When moving the printer, firmly grasp the Carrying Handles under each side. The printer may be unsteady if you hold it
Caution •
at other positions, which poses a risk of injury from dropping the printer.
Printhead, Ink Tanks, and Maintenance Cartridge
• Always store consumables in a safe location out of the reach of small children. If a child licks or ingests ink accidentally,
seek medical assistance immediately.
Caution
• If ink accidentally gets in your eyes, immediately rinse with water.
If ink gets on your skin, immediately clean it off with soap and water.
If irritation persists in your eyes or on your skin, contact a physician immediately.
• Avoid dropping or shaking printheads, ink tanks, and maintenance cartridges. Spilled ink can stain clothing and the work
area.
Never touch the electrical contacts of the Printhead after printing. The contacts become extremely hot and can cause
•
minor burns.
Other
• Never disassemble the printer or attempt repairs. There are high voltage parts inside the printer that can cause a fire or
electrical shock.
Warning
• Never use flammable sprays around the printer. The gas of flammable sprays can cause a fire or electrical shock, if it
contacts high voltage points inside the printer.
• After removing the Cutter Unit, never touch the cutting edge (a). This could cause personal injury.
User's Guide
Safety Precautions
911