Cutting Roll Paper After Printing (Mac Os) - Canon iPF680 User Manual

Hide thumbs Also See for iPF680:

Table of Contents

To enable automatic cutting, click Yes in the

self, click Print Cut Guideline.

Click OK to close the Roll Paper Options dialog box.

Confirm the print settings and print as desired.

For tips on confirming print settings, see "Confirming Print Settings ."

Roll paper will be automatically cut after printing.

Cutting Roll Paper After Printing (Mac OS)

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to

print a cut line for manual cutting.

The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps

below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.

Choose Page Setup from the application menu to display the Page Attributes dialog box.

The configuration method varies depending on the OS

and application software you are using.

If Page Setup is displayed in the application menu, the

settings are configured by opening the Page Attributes

dialog box from Page Setup.

If it is not displayed, the settings are configured in the upper

part of the printer driver displayed when you select Print

from the application software menu.

Select the printer in the

Choose the original size in the

OK to close the dialog box.

Choose Print in the application menu.

User's Guide

Automatic Cutting list. If you prefer to cut the paper later your-

Format for list.

Paper Size list.

Cutting Roll Paper After Printing (Mac OS)