Cutting Roll Paper After Printing (Mac Os) - Canon imagePROGRAF iPF6400SE User Manual

Cutting Roll Paper After Printing (Mac OS)

Cutting Roll Paper After Printing (Mac OS)

Cutting Roll Paper After Printing (Mac OS)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.
•
The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps
below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
Note
1
This sets the
Note
2
Select the printer in the
3
Choose the original size in the
4
If you configured the settings using the Page Attributes dialog box, click
then select Print from the application software menu.
5
Access the Page Setup pane.
146
B C
Format for and Paper Size.
• The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print
from the application software menu.
A
Printer list.
F
Paper Size list.
F
OK to close the dialog box, and
iPF6400SE
User's Guide