Turning The Power On; Attaching The Switch Cover - Star Micronics FVP10 series Hardware Manual

3-4. Turning the Power On
Connect the power cord according to the instructions in section 3-3, "Connecting the AC Adapter".
Turn on the power switch on the front of the printer.
The POWER lamp on the control panel will light.
Power switch
CAUTION
We recommend that you unplug the printer from the power outlet whenever you do not plan to use it for long periods.
Because of this, you should locate the printer so that the power outlet it is plugged into is nearby and easy to access.
When an Switch blind is affixed to the printer above the power switch, the ON/OFF marks of the power switch may be
hidden. If this occurs, remove the power cord from the outlet to turn the printer OFF.
3-5. Attaching the Switch Cover
You do not have to attach the switch cover. Do so only if you need to.
Attaching the switch cover will:
• Prevent unintentional operation of the power switch.
• Prevent other people from easily operating the power switch.
Attach the switch cover as shown in the figure below.
Switch cover
You can turn the power switch on (I) and off (O) by inserting a ballpoint pen or an object with a pointed tip into the holes in
the switch cover.
CAUTION
We recommend that you unplug the printer from the power outlet whenever you do not plan to use it for long periods.
Because of this, you should locate the printer so that the power outlet it is plugged into is nearby and easy to access.
- 10 -