Table of Contents
Advertisement
Dual-BinAutomaticSheet Feeder
(sF-loRMII/15RMII)
The procedureto mountthe Dual-BinASF is:
1.
2.
3.
4.
Openthe frontcoverby liftingup the backusingthe twogripson either
side, then swingdownthe transparentpart (see Figure3-l).
Openthe rear coverby liftingup the frontusingthe two gripson either
side,then removeit upward.
If thepaperguideis installed,removeit beforetakingoff the rearcover.
Movethe bailleveron top of the printerforwardto openthe paperbail.
A stackeris includedwiththe AutomaticSheetFeeder.Attachthe hook
at the top of the stackerto the AutomaticSheetFeeder.Then push the
lower sectionof the stackerdown into position,and engagethe lower
hook as shownin Figure3-9.
Figurs 3-s?. A ttachthe stsckerto the AutomaticSheet Feeder.
5. Tip the AutomaticSheetFeederforwardslightlyandputthe feederinto
placebehindthe printerplatenroller.
6. Lowerthe rear side of the AutomaticSheetFeederand attach it to the
platenshaft.
7. Closethe front coverwiththe transparentpart in the openposition.
8. 'Attach the clearplasticpapersupportsbetweenthe left and rightpaper
guidesof the hopperbins and the stacker.
20
Advertisement
Table of Contents
