Ada-L Unit Switch Settings - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
6 - 34
11.3.1

ADA-L UNIT Switch Settings

Figure 6-23 ADA-L UNIT
switches (DSW) allow a technician to configure the unit for specific
settings.
Due to location, set switches prior to installation of
ADA-L on DTL/ITL multiline terminal.
To provide control to the recorder or to enable/disable the record start warning
tones, refer to Table 6-3 ADA-L Unit Switch
Switch
SW1
SW2
shows the location of the switches. The dip
Figure 6-23 ADA-L UNIT
Table 6-3 ADA-L Unit Switch Settings
SW1-1 Connects to Multiline Terminal
Connect = Default
SW1-2 Not Used
Sets External Equipment Impedance to 600 Ω
SW2-1
SW2-2 Used for Complex Impedance Devices
(< 30 Ω Input Impedance)
Installing SV8100 Optional Equipment
UNIVERGE SV8100
Settings.
Description/Settings