NEC UNIVERGE SV8100 System Hardware Manual page 344

Issue 5.0
5 - 86
Figure 5-105 Installing Wood Screws
2. Remove the Bluetooth hanger from the cradle.
With a screwdriver, pry from the bottom, and lift the handset hanger
.
from the cradle.
3. Rotate the hanger top to bottom. Slide it downward in the
hollow until it clicks into position.
Figure 5-106 Change Handset Hanger
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100