Removing Or Installing The Tilt Legs On The Multiline Terminal; Remove Tilt Legs - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
4.9
5 - 42

Removing or Installing the Tilt Legs on the Multiline Terminal

The Tilt Legs can be removed or installed on the DT300/DT700 Series
multiline terminal.
4.9.1

Remove Tilt Legs

1. Place the telephone on a flat surface (button side down).
2. Separate the Tilt Legs and place them flat against the
telephone. See
3. Push downward (two arrows) and slide downward (refer to
Figure 5-40 Attach Tilt Legs to DT300/DT700 Series
Figure 5-40 Attach Tilt Legs to DT300/DT700 Series Terminal
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-39 Separating the Tilt
Figure 5-39 Separating the Tilt Legs
UNIVERGE SV8100
Legs.
Terminal.