NEC UNIVERGE SV8100 System Hardware Manual page 348

Issue 5.0
5 - 90
5. Insert the lower claws of the Bottom Unit (see
Installing the BHA-L
terminal.
6. Align connector on inside of BHA-L UNIT and push down until
unit snaps into place.
7. Set tilt legs to desired position.
8. Return the multiline terminal to the numbered keypad in the up
position.
9. Connect the Line cord and the AC adapter.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-112 Removing the Connector Cover
UNIT) into precut holes on the multiline
Figure 5-113 Installing the BHA-L UNIT
UNIVERGE SV8100
Figure 5-113