Installing The Bluetooth Cordless Handset; Installing The Bluetooth Handset Cradle - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100
7.4
System Hardware Manual

Installing the Bluetooth Cordless Handset

The BCH-L (BK) UNIT is an optional device that transforms the standard
multifunctional telephone into a cordless terminal. This section explains how
to transform the standard hand-set into a BCH-L (BK) UNIT. The BCH-L (BK)
UNIT cannot be connected to the DTL-2E-1 or DTL-6DE-1 telephones.
7.4.1

Installing the Bluetooth Handset Cradle

Before installing or removing the BCH-L (BK)
UNIT, remove the line cord and the AC
adapter from the outlet.
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline
terminal.
Only one BCH-L (BK) UNIT can be attached to the DTL multiline
.
terminal.
3. Lower the tilt leg to the first position (refer to
Separate Tilt Leg from Leg
Tilt Leg
4. Push the two stopper tabs through the slots to separate the tilt
leg from the leg support.
5. Lay the tilt leg and the leg support flat.
6. Press the two tabs locking the legs to the multiline terminal and
pull the legs toward you, lifting to remove (refer to
Remove Legs From Multiline Terminal on page
Support).
Figure 5-94 Separate Tilt Leg from Leg Support
Issue 5.0
Figure 5-94
Stoppers
Figure 5-95
5-80).
5 - 79