NEC UNIVERGE SV8100 System Hardware Manual page 146

Issue 5.0
3 - 78
3. Swing access panel outward and unplug fan power cable. See
Figure 3-102 Opening Chassis Access Panel (19"
Figure 3-102 Opening Chassis Access Panel (19" Chassis)
4. Remove chassis access panel from rear of chassis.
5. Remove cabling from retention clips. See
Access Panel
Figure 3-103 Chassis Access Panel Removed
6. Remove two screws securing fan to access cover. Keep
screws for use when installing replacement fan (refer to
3-103 Chassis Access Panel Removed on page
Removed.
Installing the SV8100 Chassis
UNIVERGE SV8100
Chassis).
Fan Power Cable Plug
Figure 3-103 Chassis
Figure
3-78).