Chs Large Batt Box To Chs2U Connection - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
3 - 68
Figure 3-86 Connecting Battery Cables
16. Insert tabs on cover into holes on CHS LARGE BATT BOX.
Slide the cover left until seated and tighten the screw. Refer to
Figure 3-87 Installing Cover
3.2.3

CHS LARGE BATT BOX to CHS2U Connection

1. Power down the CHS2U chassis.
2. Disconnect AC power cable from rear of chassis.
Battery.
Figure 3-87 Installing Cover Battery
Ensure the CHS2U chassis is powered OFF.
UNIVERGE SV8100
Installing the SV8100 Chassis