Gigabit Adapter (Gba-L Unit) - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100
11.6
System Hardware Manual
2. Answering Calls:
If you receive a call via PSTN during a conversation via
LAN, answer the call by completing the LAN call and
placing the handset back into the cradle. Change the
LAN/PSTN Change Switch to PSTN and then lift the
handset to answer the call. If you change the LAN/PSTN
Change Switch to the PSTN position while talking via
LAN, the LAN call is disconnected.
Other than receiving calls, no other terminal functions are
available.
3. Adjusting the Ring Volume
Use the Volume Control Switch located on the PSA-L adapter
to adjust through the three available volume levels.
Other than receiving calls, no other terminal functions are
available.
4. When Power is Restored
The IP keyset restarts and reconnects to the network LAN.
However, if you are on a PSTN call when the power is restored,
your conversation continues until the handset is placed in the
cradle. Once this occurs, the IP terminal restarts and
reconnects to the LAN.
Other than receiving calls, no other terminal functions are
available.

Gigabit Adapter (GBA-L UNIT)

The GBA-L UNIT enables IP telephones (DT730/DT750) to operate in a
Gigabit Ethernet environment. A single Gigabit Ethernet desktop drop
provides a 10/100Mbps to the IP telephone and a gigabit connection to a
personal computer. The Gigabit Adapter is installed on the bottom of the IP
telephone and offers a gigabit interface to the LAN side and PC port. The
Gigabit Adapter is powered by PoE or can operate off of local power.
Issue 5.0
6 - 51